71 GS455 now Stage1
Updated 3-29-08
Body lifted off the frame.
Side view of body off the frame.
Another side view of the body off the frame.
Interior pic showing all seats removed, doors, carpeting.
Rest of interior to be gutted to a shell.
Rear axle and rear suspension removed from the frame.
All items removed from the firewall.
Frame rolled from under body and ready for dissassembly.
Front suspension to be removed so frame can be pressure washed,
rust proofed and painted.
Frame stripped of all components and ready for degreasing
and pressure washing!
Frame painted and ready for reassembly.
Rusted trunk pan removed and spot welds ground smooth. Phosphoric
acid application is next followed by a new trunk pan.
New trunk pan installed and welds ground smooth.
Body ready to be lowered onto restored frame.
Body going to be lowered onto restored chassis!
Firewall painted and frame detailed.
Body lowered on chassis and body mounts tightened.
Body ready to be stripped and then sent to paint shop!
Fenders stripped to factory e-prime...ready to go to the
paint shop.
Fenders final sanded and filled in low spots/dings. Ready
for epoxy primer.
Rear clip in epoxy primer....ready for guide-coat sanding.
Roof done the same way.
Door being longblock sanded.
Trunk lid epoxy primed.
Passenger door done.
All jambs done.
Finished door jamb sanding.
Body reassembled and all gaps checked.
All gaps checked and final sanding of first primer coat.
Gas tank emptied, cleaned and painted. Rear axle disassembled,
degreased, hand sanded, primed and painted. Going to the axle builder to
install 3.08 gears and a posi unit.